Skip to product information
NPHU-4010-3/8-316 – Flat Nozzle, 3/8 Inlet, 316L Stainless Steel
Images are representative. Products may differ in material or configuration.
Images are representative. Products may differ in material or configuration.
Product Parameters
| Product Family | Flat |
|---|---|
| Product Series | NPHU |
| Capacity Size | 10 |
| Inlet Connection Thread Type | NPT |
| Material Composition Filter | 316L stainless steel |
| Inlet Connection Size (in.) | 3/8 |
| Length (mm) | 22 |
| Length (in) | 1.250 |
| Hex Size (mm) | 12.7 |
| Hex Size (in) | 11/16 |
| Equivalent Orifice Diameter (in) | 0.075 |
| Spray Angle at Rated Pressure (PSI) | 40 |
| Equivalent Orifice Diameter (mm) | 2 |
Description
Product Overview
Inside the automotive line's specialty applications stage, a plant operator relies on the NPHU-4010-3/8-316 to deliver consistent flat spray coverage critical for uniform component rinsing. Constructed from 316L stainless steel, the nozzle withstands corrosive cleaning agents while maintaining precise flow through its 3/8-inch inlet. This combination ensures reduced downtime due to wear and a measurable improvement in process repeatability. The operator integrates the nozzle into a high-pressure system, achieving even liquid distribution across complex geometries.
Applications
The NPHU-4010-3/8-316 is frequently employed in cleaning & washing tasks where consistent spray patterns improve contaminant removal without excessive fluid use. Its reliability under continuous operation also supports dust & pollution control efforts by effectively wetting surfaces to minimize airborne particles.
