SuperKlean Dairy Nozzles:
Two Products, One Manufacturer
SuperKlean, a division of NozzlePro, manufactures two purpose-built products for dairy operations: the DuraFlow Dairy Milking Parlor Nozzle โ a precision teat dip applicator engineered for pre- and post-dip chemical application in milking parlors โ and the DuraFlow Heavy-Duty Washdown Gun โ a 200ยฐF-rated, rebuildable facility washdown gun for dairy plant sanitation. For complete specifications, models, and ordering on all SuperKlean products, visit superklean.com.
Precision Pre- and Post-Teat Dip for Milking Parlors
The SuperKlean DuraFlow Dairy Milking Parlor Nozzle (model DH150D) is a custom-built, stainless steel teat dip applicator developed in close collaboration with dairymen and milking parlor operators over five or more years. It is purpose-engineered for pre-dip and post-dip chemical application โ not adapted from a general-purpose spray nozzle. Complete product information and ordering is available at superklean.com/our-products/duraflow-dairy-nozzle.
The DuraFlow DH150D is a professional-grade stainless steel milking parlor nozzle engineered specifically for pre-dip and post-dip teat treatment โ not a repurposed plastic sprayer. Its 90-degree "direct-on" spray tip provides an ergonomic, natural application angle that plastic sprayers cannot match. The precisely engineered spray pattern delivers full teat coverage while minimizing the volume of expensive pre- and post-dip chemicals consumed. Available in dark blue (for post-dip) or red (for pre-dip) to eliminate application mix-ups, and includes a built-in mounting hook for quick, safe operator access between applications.
For complete technical specifications, part numbers, ordering, and the full SuperKlean product page, visit superklean.com or contact NozzlePro at (650) 375-7002.
90-Degree "Direct-On" Spray Tip
Ergonomic angle โ more natural than plastic sprayersThe DH150D's 90-degree spray tip orients the spray perpendicular to the handle axis, allowing operators to hold the nozzle in a natural, comfortable position during teat dip application. This contrasts with conventional plastic teat dip sprayers, which require the operator's wrist to rotate into an awkward angle to direct the spray correctly โ a cumulative stress factor in high-throughput milking parlors processing hundreds of animals per shift.
Precision Spray Pattern โ Full Teat Coverage
Engineered for chemical efficiency and coverage consistencyThe DH150D's spray tip is precisely engineered to deliver complete teat coverage with a controlled, defined spray pattern โ directing chemical only where it needs to go rather than broadcasting excess spray into the surrounding environment. In milking parlor operation, where pre-dip and post-dip chemicals represent a significant per-head cost, reduced chemical consumption per application adds up across thousands of animals per month.
Industrial-Grade Stainless Steel Construction
Built for the rigors of daily milking parlor operationThe DH150D is built with stainless steel construction โ not the plastic body used in commodity teat dip sprayers. Milking parlor environments subject equipment to daily exposure to iodine-based pre-dips, chlorhexidine and glycerin post-dip formulations, high-pressure rinse water, and frequent drops onto concrete floors. Stainless steel construction withstands this combination of chemical and mechanical stress where plastic bodies crack, discolor, and degrade over time.
Color-Coded for Pre-Dip / Post-Dip Designation
Dark blue or red โ eliminate chemical mix-up at the parlorThe DH150D is available in two cover colors specifically chosen for milking parlor chemical designation: dark blue (part number DH150D-DB) and red (part number DH150D-R). Color-coding the nozzle to the chemical application โ for example, dark blue for post-dip and red for pre-dip โ provides an immediate, unambiguous visual indicator for operators and reduces the risk of applying the wrong chemical at the wrong stage of the milking process. Comes ready to use with 3/8" or 1/4" hose barb fitting.
DuraFlow Dairy Nozzle Ordering Information
DH150D โ Confirmed Specifications
| Parameter | Value | Notes |
|---|---|---|
| Operating Pressure (Typical) | 65โ85 PSI | Typical milking parlor supply pressure range |
| Maximum Pressure Rating | 150 PSI | Do not exceed โ confirmed product specification |
| Maximum Temperature | 200ยฐF (93ยฐC) | Warm-water rinse compatible |
| Flow Rate | Varies by tip selection | Depends on nozzle tip โ see superklean.com for tip data |
| Spray Tip Angle | 90ยฐ ("direct-on") | Ergonomic perpendicular application angle |
| Hose Barb Connection | 3/8" or 1/4" | Ready to use โ connects to standard milking parlor chemical supply line |
| Body Material | Stainless Steel | Industrial-grade โ corrosion resistant in pre/post dip chemical environments |
| Cover Colors / Part Numbers | Dark Blue (DH150D-DB) / Red (DH150D-R) | Color-coded for pre-dip / post-dip designation |
| Mounting | Built-in hook | Standard โ for quick, safe parlor-side access |
What is the SuperKlean DuraFlow Dairy Milking Parlor Nozzle?
The SuperKlean DuraFlow washdown gun (DH150S) is designed for food and beverage processing environments rather than adapted from general industrial hardware. Key differences for dairy plant service: a 200ยฐF continuous temperature rating for hot-water dairy sanitation; thick rubber over-mold casing for drop protection on expensive tile and epoxy floors; a rebuildable cartridge that allows the internal seal and valve pack to be replaced in the field; and a variable spray pattern from wide sweeping fan to solid stream without changing nozzles.
For complete specifications โ flow rates at rated pressure, pressure ratings by model, internal material options, rebuild kit part numbers โ the authoritative source is superklean.com. NozzlePro can assist with model selection and ordering at (650) 375-7002.
SuperKlean DH150S Dairy Washdown Gun โ Key Engineering Features
The following features are confirmed from SuperKlean product documentation. For precise numerical specifications โ flow rates by pressure, dimensions, model comparison, and rebuild intervals โ visit superklean.com.
200ยฐF Continuous Temperature Rating
Hot-water dairy sanitation โ milk fat removal at temperatureSuperKlean washdown guns are rated for continuous service at up to 200ยฐF (93ยฐC). This is relevant for dairy plant washdown because effective milk fat and butterfat removal requires hot water above 140ยฐF, and full dairy sanitation circuits typically run at 160โ180ยฐF. The 200ยฐF rating keeps the gun within specification at the upper end of dairy hot-water supply temperatures.
Drop-Resistant Rubber Over-Mold Casing
Gun and floor protection โ dairy tile and epoxy safeThe DH150S features thick rubber over-mold casing that protects both the gun and dairy plant floors when dropped. Dairy floors surfaced with quarry tile, high-build epoxy, or poured polyurethane are costly to repair, and a heavy metal or hard-plastic gun dropped from waist height can crack tile or chip epoxy coatings. The rubber casing distributes impact force across a larger contact area โ reducing peak stress at the point of contact.
Variable Spray Pattern
Wide fan to solid stream โ no nozzle change requiredThe DH150S provides continuous spray pattern adjustment from a wide sweeping fan to a concentrated solid-stream jet at the nozzle tip โ without nozzle changes or attachments. Wide fan spray covers open floor areas efficiently during production changeover washdowns; solid stream concentrates force into drains, equipment joints, and hard-to-reach crevices where fan spray would bounce back toward the operator.
Field-Rebuildable Cartridge Design
Stocking rebuild kits extends total gun service lifeThe DH150S separates the internal valve and seal pack โ components subject to wear from repeated hot-water thermal cycling โ from the gun body, handle, and trigger, which remain in service considerably longer. When the internal components require replacement, a rebuild kit restores the gun to full performance without replacing the entire assembly. Rebuild kits can be stocked at the facility and installed by maintenance technicians in the field without removing the gun from the station hose assembly.
DH150S โ Confirmed Specifications
| Parameter | Value | Notes |
|---|---|---|
| Maximum Pressure | 150 PSI | Confirmed product specification |
| Maximum Temperature | 200ยฐF (93ยฐC) | Continuous hot-water service โ dairy sanitation rated |
| Inlet / Outlet | ยฝ" NPT | Standard industrial washdown station connection |
| Nozzle Body | Stainless Steel, epoxy resin coated | Corrosion-resistant for food & beverage processing environments |
| Cartridge | Stainless Steel (Part: 7-DHS) | Contains all internal parts โ field-replaceable without gun removal |
| Weight | 1.7 lbs | Confirmed product specification |
| Flow Rate (High Flow) | 4.39โ11.89 GPM @ 25โ150 PSI | See superklean.com for full pressure/flow table |
| Flow Rate (Low Flow) | 2.93โ7.19 GPM @ 25โ150 PSI | Requires flow restrictor adapter (Part: 8-FR-NPT) |
| Spray Pattern | Variable: wide fan โ solid stream | Continuous adjustment โ no nozzle change |
| Internal Material Options | Brass, Aluminum, or 300-Series SS | Specify SS for product-zone and high-sanitizer-exposure positions |
DH150S Spare Parts Reference
| Part Number | Description |
|---|---|
| 7-DHS | Cartridge / barrel assembly โ stainless steel โ contains all internal parts (DuraFlow nozzles) |
| 2-DHS | DuraFlow lever โ stainless steel with plastic dip |
| 3-DH | Nozzle lever bolt โ stainless steel |
| 4-DHDB | Nozzle cover โ dark blue |
| 4-DHR | Nozzle cover โ red |
| 4-DHW | Nozzle cover โ white |
| 8-FR-NPT | Flow restrictor adapter โ required for low-flow operation |
For current pricing, availability, and additional accessories, visit superklean.com or contact NozzlePro.
SuperKlean DuraFlow Washdown Gun Key Specifications
SuperKlean Dairy Products โ Common Questions
These are two distinct products for two different dairy applications. The DH150D (DuraFlow Dairy Milking Parlor Nozzle) is a precision teat dip applicator โ a hand-held stainless steel nozzle with a 90-degree spray tip used by milking parlor operators to apply pre-dip and post-dip chemicals directly to each animal's teats. The DH150S is a heavy-duty facility washdown gun with a ยฝ" NPT connection to a hot-water washdown station, used for sanitation of dairy processing floors, equipment surfaces, and drains. Both are manufactured by SuperKlean and are available through NozzlePro. For complete specifications and ordering on both products, visit superklean.com.
For dairy product zones and areas with frequent exposure to sodium hypochlorite or peroxyacetic acid sanitizers, specify the 300-series stainless steel internal option. Brass internals are suitable for general washdown areas with moderate chloride water supply and indirect sanitizer contact. Aluminum internals offer lighter weight but are not recommended for high-alkalinity water circuits or direct sanitizer exposure. Consult SuperKlean's model selection guide at superklean.com or contact NozzlePro at (650) 375-7002 for a recommendation specific to your facility conditions.
The DH150D is described by SuperKlean as compatible with most pre- and post-teat dip chemicals and viscosities, and its stainless steel construction provides good resistance to iodine-based formulations that corrode or discolor plastic sprayers. For confirmation of compatibility with a specific chemical product or concentration, consult SuperKlean directly at superklean.com โ your teat dip chemical supplier can also confirm materials compatibility.
The DH150S cartridge assembly (Part 7-DHS) is designed for field replacement โ it can be installed by maintenance technicians without removing the gun from the washdown station hose assembly, and without specialized tooling beyond what a typical dairy plant maintenance team would carry. SuperKlean makes individual replacement parts available (lever, lever bolt, nozzle cover, cartridge) so facilities can stock spares and perform planned maintenance rather than waiting for emergency part orders. Contact NozzlePro at (650) 375-7002 or superklean.com for rebuild kit pricing and lead times.
Two Products. One Manufacturer. Built for Dairy.
Contact NozzlePro to specify SuperKlean DuraFlow dairy nozzles and washdown guns for your milking parlor or processing facility โ or visit superklean.com for complete product specifications, model selection, and direct ordering.
ย
ย