Applications
Aplicaciones de lavado a presión
Match spray angle, orifice, and materials to your PSI/GPM and soils for faster results with less rework.
Find the Right Pressure‑Wash Nozzle
Size the orifice and pick the pattern that clears soil quickly without wasting water or chemicals.
Benefits of NozzlePro Aplicaciones de lavado a presión
- Faster Turns: Reduce passes by matching angle and flow to the soil.
- Lower Water Use: Right-sized orifices hold pressure with less waste.
- Repeatable Finish: Stable patterns produce consistent results.
- Safer Distance: Maintain needed impact at a safer standoff.
- Less Wear: Balanced flow reduces pump and hose stress.
- Quick Changeovers: Use quick-connects to swap tips in seconds.
Common Use Cases
Maintenance Bench Wash — Manufacturing & MRO
Learn moreAluminum Rim Brightening Rinse — Fleet & Transportation
Learn moreRoof Curb Prep Rinse — Specialty & Surface Prep
Learn moreAisle Marking Prep Clean — Manufacturing & MRO
Learn moreHow We Help
We evaluate soils, surfaces, target standoff, and your pump’s PSI/GPM to recommend patterns and orifices that deliver usable impact. Materials are selected to withstand abrasion and detergents, and quick‑connects speed changeovers.
Frequently Asked Questions
For Overview, start wider for coverage (40°–65°) and go narrower (0°–25°) when you need more impact at the same standoff.
Size the orifice so your pump holds target PSI with the available GPM. Check for pressure drop under load.
For abrasive soils or detergents, hardened stainless and 316 SS usually outlast brass.
When patterns open up or flow rises above spec, replace tips to restore impact.
Yes—use the narrowest practical angle and the smallest orifice that sustains pressure.
They shorten changeovers, helping match the tip to each step of the job.
Request Sizing Help
Tell us your soils, surfaces, and available pressure/flow—we'll recommend patterns and orifices that hit your goals.