Air Atomizing Spray Nozzles

- Multiple spray pattern options available
- Broad flow and pressure operating ranges
- Compatible with standard NPT connections
- Available in corrosion-resistant materials

Select products from this collection when designing or maintaining systems that require controlled liquid distribution for air atomizing spray nozzles operations. Final nozzle selection should be based on flow rate, spray angle, operating pressure, and material compatibility.

What is the Air Atomizing Spray Nozzles series used for?

Air Atomizing Spray Nozzles fine spray nozzles produce small droplets (20–100 microns) for humidification, evaporative cooling, dust suppression, and light coating. The fine mist evaporates quickly without wetting surfaces.

What's the difference between hydraulic and air-atomizing nozzles?

Hydraulic nozzles (NPFA, NPMA) use liquid pressure alone—simpler, no air required. Air-atomizing nozzles mix compressed air with liquid for even finer droplets at lower liquid pressures, but need air supply.

Do Air Atomizing Spray Nozzles nozzles require strainers?

Yes—critical due to small orifices. Models like NPFAS and NPMAS include built-in strainers. For others, install upstream line strainers with mesh finer than the orifice diameter.

What operating pressure do fog nozzles need?

Hydraulic fog nozzles typically run 60–200 PSI. Higher pressure produces finer droplets. Low pressure causes larger droplets and potential dripping. Maintain consistent pressure at the nozzle.

How do I prevent dripping?

Maintain adequate pressure, use anti-drip models like NPFD with check valves, install individual shutoffs, and ensure proper drainage during shutdown.

What series are similar to Air Atomizing Spray Nozzles?

Related fine spray options include NPFA, NPFAS, NPMA, NPMAS, NPFD—compare by droplet size, flow rate, and strainer options.