Cooling Solids

Home › Applications › Cooling & Quenching › Solid Cooling

Industrial Spray Nozzles for Solid Cooling

Efficient cooling of solids impacts product quality, energy use, and throughput. NozzlePro provides spray solutions tuned for slabs, billets, rolls, parts, food products, plastics, and electronics—delivering precise droplets and uniform coverage to control temperature and protect surfaces.

Full Cone Flat Fan Hollow Cone Fog & Mist Hydraulic Atomizing High-Pressure All Patterns

The Importance of Efficient Solid Cooling

Product Quality

Swift, even cooling prevents warping, cracking, and internal stresses for better integrity and finish.

Energy Efficiency

Optimized droplets reduce water and pumping energy; tighter control shortens cycle times.

Productivity

Consistent heat extraction increases throughput and reduces rework and downtime.

Control Heat with the Right Droplets

Match droplet size to the mechanism: use fine droplets for evaporative cooling on hot surfaces or air/gas streams; step up to coarser droplets for convective surface cooling where drift must be minimized. Choose patterns by geometry:

Flat Fan – linear, sheeted coverage for webs, strips, and belts (rectangular variants available).
Full Cone – volumetric coverage for parts and bulk shapes; good for coarse, low-drift droplets.
Hollow Cone – high surface area droplets for rapid heat removal.
Fog & Mist – very fine evaporative cooling in enclosed cells.
Hydraulic Atomizing – fine, uniform droplets without compressed air.

What We Recommend

Metals & Metalworking

Slabs/Billets/Rolls: Full Cone for volumetric cooling and low drift
Strip/Web Cooling: Flat Fan headers; rectangular fans for narrow lanes
Heat Treat Quench: Hydraulic Atomizing or Full Cone tuned to quench curve

Food Processing

Post-Process Cooling: Fog & Mist for gentle evaporative cooling
Conveyor Products: Flat Fan for even film across lanes

Plastics & Composites

Extrusions/Profiles: Flat Fan (rectangular) to fit profile width
Molded Parts: Full Cone for 3D shapes without imprinting

Electronics & Assemblies

Localized Cooling: Hollow Cone high surface-area droplets
Low-Flow Evaporation: Fog & Mist in enclosed zones

Advantages of NozzlePro Solid Cooling Solutions

Precision Cooling: Wide range of patterns and capacities to hit target temperatures.
Uniform Coverage: Even films reduce thermal gradients and defects.
Energy Efficiency: Match droplets to mechanism to save water and pumping power.
Customizable: Stainless, ceramic, and tungsten carbide options; strainers/manifolds available.

Need sizing help? Share heat load, media, line speed, stand-off, and target temperature—our team will spec the nozzle and materials.